Home > products > Tension Testing Series > Rain test box
Rain test box
This product is applicable to the test to check whether the electrical products, shell and seal can ensure the good performance of equipment and components under the rain environment. The product adopts scientific design, so that the equipment can simulate dripping, sprinkling, splashing, water spraying and other environments vividly.

Model:HK-NY-3400

Update time:[2019-11-19]
Feature Parameter Standard?Compliance

I. application of rain test box equipment:

This product is applicable to the test to check whether the electrical products, shell and seal can ensure the good performance of equipment and components under the rain environment. The product adopts scientific design, so that the equipment can simulate dripping, sprinkling, splashing, water spraying and other environments vividly. Entering the comprehensive control system and the adoption of frequency conversion technology, the rotation angle of rainfall test stand, the swing angle of water spray swing bar and the swing frequency of water spray volume can be automatically adjusted.

III. technical parameters of the test chamber: in conformity with IPX3 and IPx4 standards

1. Inner box size (mm): 800 × 800 × 800 (D × w × h) or specified

2. Speed of test bench (RPM): 1 ~ 10 adjustable

3. Spray ring radius (mm): 300 / 375

4. Swing angle range of water spray pipe: 45 °, 90 ° 180 ° 350 ° (can be set)

5. Diameter of spray hole (mm): φ 0.4 (according to the standard)

6. Spacing of spray hole diameter (mm): 50

7. Flow rate of each spray hole: 0.07 L / min + 5%

8. Water spray pressure (kPa): 400

9. Swing amplitude of swing tube: maximum ± 90 °

10. Swinging speed of water spray pipe: 25 / min

11. Test time: 1-99999min (settable)

12. Rain water pressure: 80 ~ 100KPA (adjustable)

13. The distance between the test sample and the test equipment is 200mm. After the test, the functional test shall be carried out after the normal temperature recovers for 24h.

14. The box is made of stainless steel or powder spraying, and the toughened glass window can be seen.

15. It is equipped with a moderate round turntable (for lofting products) with adjustable speed

16. Control system: touch screen control system independently developed by Hongkang company.

17. Power supply 220V 50Hz

18. Executive Standards: GB2423, 38-90, gb4706.32-2004 iec-5129

IV. structural material of rain box:

1. The liner is made of stainless 304 steel

2. Outer box Stainless Steel 201

3. The sample table is equipped with a circular rotary table with adjustable speed

V. safety protection device of rain tester:

1. Power overload and short circuit protection

2. Grounding protection

3. Water shortage protection

4. Alarm sound prompt

II. Use of rain box equipment:

This product is applicable to the test to check whether the electrical products, shell and seal can ensure the good performance of equipment and components under the rain environment. The product adopts scientific design, so that the equipment can simulate dripping, sprinkling, splashing, water spraying and other environments vividly. Entering the comprehensive control system and the adoption of frequency conversion technology, the rotation angle of rainfall test stand, the swing angle of water spray swing bar and the swing frequency of water spray volume can be automatically adjusted.

Related products
Products
Relevant news

skype:0755-29437880

Phone:13342990691

email:sales@hkgd17.com

Ali Wangwang:13342990691

QQ:583992516